Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Tracy?
Gate repair in Tracy typically runs $175 to $650 for most residential calls, and a control board or operator replacement on an automatic gate usually lands between $350 and $1,100. Simple fixes like a misaligned latch, a bent hinge, or a worn roller often come in at the low end, while electric gate problems that involve the operator, wiring, or access hardware push toward the top of the range. We give written estimates before any work starts, so the number you see is the number you pay.
We’re an electric gate specialist working on nine major automation systems, from Mighty Mule to FAAC, and the technicians we connect you with have up to 15 years of experience. Call (844) 834-1771 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most residential gate repairs in Tracy run $175-$650.
- Electric and automatic gate repairs (operator, control board, wiring) typically run $350-$1,100.
- The written estimate is fixed per job, and the estimate itself is free.
- Whether your gate is a LiftMaster swing operator or a Mighty Mule DIY install, the price depends on the parts and labor the fault actually needs.
- We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
Gate Repair Cost Breakdown (2026)
Below are typical estimated ranges for the Tracy market. These are ballpark figures for common jobs, not a quote. The written estimate after an on-site look sets the final price.
| Repair Item | Typical Estimated Range |
|---|---|
| Latch, hinge, or roller adjustment | $175 – $275 |
| Gate sagging / post and hinge realignment | $250 – $500 |
| Slide gate off its track (reset and track work) | $300 – $650 |
| Electric gate not moving (diagnosis and minor fix) | $350 – $550 |
| Operator / motor replacement (residential swing or slide) | $600 – $1,100 |
| Control board replacement | $350 – $750 |
| Safety sensor / photo-eye and access hardware (keypad, remote receiver) | $200 – $450 |
| Wiring repair (low-voltage control, damaged run) | $250 – $600 |
Pedestrian gates and manual driveway gates usually sit at the lower end because there’s no operator involved. Automatic gates cost more because the fault could be mechanical, electrical, or both, and a proper diagnosis takes time before any part is swapped. That diagnostic step is what keeps you from paying for a motor when the real problem was a dead safety sensor or a control board reading a fault.
What pushes a Tracy job toward the higher end: a commercial-grade operator (FAAC and BFT systems often need specific boards and setup), a gate that’s been binding for a while and has worn its hinges and posts, or a wiring run that was damaged underground. What keeps it low: a mechanical adjust, a battery or receiver swap, or an operator that only needs recalibration.
What Affects Gate Repair Pricing in Tracy
- Gate type. A manual pedestrian gate has a handful of moving parts. A slide gate on a track with a heavy panel has more wear points, and a swing gate with two leaves doubles the hardware and the alignment work.
- Operator brand and age. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems regularly, so we know which parts are common and which are special-order. A rare board or an older operator can add cost and lead time.
- Whether the fault is mechanical, electrical, or both. A gate that won’t open can be a bent hinge, a dead control board, a tripped safety sensor, or a bad remote. Finding which one it is takes the same diagnostic time regardless, so a straightforward diagnosis first usually saves money.
- Property access and gate weight. A wide commercial slide gate on a managed property takes more hands and more setup than a residential swing gate, and that labor shows up in the estimate.
- Wiring condition. Control wiring in Tracy’s inland valley heat can crack and dry out over time, and buried runs that have been dug into or chewed can need replacing, not just repairing.
- Parts availability. Common residential parts for Mighty Mule and Ghost Controls are usually quick to source. Professional-grade operators sometimes need a specific board or arm that has to be ordered.
One thing that doesn’t change the price: the time of day the gate fails. The estimate is set per job by the work it needs, not by when you call.
Repair or Replace: Which Makes Sense?
Repair usually makes sense when the gate frame, posts, and operator are sound and the fault is one component: a board, a sensor, a hinge, a roller. Replacement usually makes sense when the operator is failing across multiple systems, when parts are no longer available, or when a heavy gate has been binding so long that the frame and posts need realignment anyway. We tell you which one the fault actually calls for, and we’ll say so plainly when a repair is the cheaper path. Our gate repair service covers the diagnostic work that decides this, and if a replacement is the honest answer, we handle installation too, so you’re not hunting for a second contractor.
As a full-service gate company, we’d rather fix the part that failed than sell you a whole new system. The estimate will lay out both paths when replacement is a real option, and you decide.
How to Save on Gate Repair
Start with the free estimate. A written number before any work begins is the single biggest protection against surprise charges. Call (844) 834-1771 and we’ll get a technician out to look.
- Fix the small stuff early. A gate that’s started to drag or hesitate is cheaper to correct than one that’s been forcing against a bind for months. Waiting until the operator gives out turns a $250 realignment into a motor replacement.
- Describe the symptom clearly. Tell us whether the gate won’t move at all, moves partway, opens but won’t close, or runs on its own. That answer narrows the diagnosis before anyone arrives.
- Check the simple things first. Confirm the remote battery, the wall switch, and whether the safety sensors are blocked. Sometimes the gate is fine and the problem is upstream.
- Ask about both paths. If the estimate includes a replacement option, ask what repair would cost and how long it would hold. A specialist should be able to tell you.
- Keep the control board dry and clear. Debris and standing water around the operator housing shorten board life, and boards are one of the pricier parts.
None of that requires a maintenance plan or a contract. It’s just the work the gate needs, priced per job.
Why Brand Familiarity Keeps the Price Honest
The operator brand on your gate decides which parts fit, which faults are common, and how long a fix takes. That’s why we stay fluent across the whole range: Mighty Mule and Ghost Controls on the DIY-installed residential side, and FAAC, BFT, DoorKing, LiftMaster, Linear, Viking, and Elite on the professional and commercial side. A technician who only knows two brands spends diagnostic time learning yours. We spend that time fixing it.
Electric gate repair is a core specialty here, not an add-on. Control boards, operators, wiring, and access hardware are daily work. When your gate carries a LiftMaster swing operator or a DoorKing slide system, the person who shows up has seen that family of equipment before. You can read more about the full range of work we take on at Gate Repair Tracy.
What Happens When You Call
You call, you describe what the gate is doing, and we ask enough questions to book the right kind of visit. A technician comes out, diagnoses the fault, and gives you a written estimate: what’s wrong, what the fix is, and what it costs. You approve it or you don’t. Nothing gets replaced before you say go.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If your gate fails on a Saturday, call and we’ll book you into Sunday. A call outside dispatch hours is booked into the next opening.
FAQs – Gate Repair Cost
How much does gate repair cost in Tracy?
Most residential gate repairs in Tracy run $175 to $650, with electric and automatic gate repairs typically between $350 and $1,100 depending on the operator and the parts involved. The written estimate sets the final price. Call (844) 834-1771 for an exact quote, and the estimate is free.
Is it cheaper to repair or replace a gate operator?
Repair is usually cheaper when the operator itself is sound and one component has failed, often $350 to $750 for a control board or $200 to $450 for sensors and access hardware. Replacement, typically $600 to $1,100 for a residential operator, makes sense when the unit is failing across multiple systems or parts are no longer available. We’ll tell you which path the fault calls for. Call (844) 834-1771 for a free estimate.
Why won’t my electric gate open, and what will it cost to fix?
The most common causes are a dead control board, a blocked or misaligned safety sensor, a bad remote or receiver, damaged low-voltage wiring, or a mechanical bind in the gate itself, and the fix typically falls between $200 and $750. Diagnosis comes first so you don’t pay for a motor the gate didn’t need. Call (844) 834-1771 and we’ll get a technician out to find the actual fault.
Do you charge extra for same-day or emergency gate repair?
No. Same-day work is priced the same way as any other job, set per job by the written estimate, with no premium or surcharge for timing. We answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 834-1771 for a free estimate.
How much does it cost to fix a gate that came off its track?
Resetting a slide gate that’s come off its track and repairing the track typically runs $300 to $650. If the panel is heavy or the posts have shifted, the realignment adds to that. A gate coming off repeatedly usually means a footing or track problem that needs a proper look. Call (844) 834-1771 for a free estimate.
Do you work on Mighty Mule and FAAC gates?
Yes. We work on Mighty Mule and Ghost Controls residential systems and professional-grade FAAC and BFT operators, along with LiftMaster, Linear, Viking, DoorKing, and Elite. That range covers DIY installs and commercial systems in the same visit schedule. Call (844) 834-1771 to book a diagnostic.
Get a Free Gate Repair Estimate in Tracy
If your gate won’t open, won’t close, or won’t stay on its track, the fastest way to know what it costs is to have someone look at it. Our technicians have up to 15 years of experience across nine gate brands, and every estimate is free and in writing. Call (844) 834-1771 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Safety note: the wiring and power side of a gate operator carries real risk, and a heavy gate panel can cause serious injury if it moves unexpectedly. Don’t open the operator housing or work on the power feed yourself. Leave that to a trained professional.
Pricing reflects the Tracy market as of 2026. Gate Repair Tracy offers free estimates – call (844) 834-1771.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Doug Gallagher"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Maria Morales"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Roger Ziegler