Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Tracy Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls gate repair and service in Tracy, CA. Our technicians work on Ghost Controls systems regularly, from the single-swing kits to the solar and heavy-duty operators, and they diagnose the actual failure instead of guessing at it. As an independent service provider, we are not affiliated with or authorized by Ghost Controls – we repair, install and service their equipment with quality parts that fit it.
If your Ghost Controls gate is dead, stalling or reversing on its own, call (844) 834-1771. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Gate Repair Tracy for Your Ghost Controls Gate Repair?
Ghost Controls equipment shows up on a lot of driveways around Tracy, partly because it’s designed to be owner-installed. That origin matters when something goes wrong. A system wired by a homeowner on a weekend can work fine for years, then need a careful eye on the parts that were never quite set right – the arm clamps, the limit positions, the battery sizing.
Our technicians have up to 15 years of experience and work on Ghost Controls boards, operators, limit switches and accessories as part of daily work, not an occasional favor. We test a system rather than swap parts at it, and we use quality parts that fit Ghost Controls equipment. When OEM parts are the safer match, we say so. When a quality aftermarket battery or remote meets spec exactly, we say that too.
That last point matters for your warranty. We work in a way that respects the manufacturer’s coverage wherever we can, and we’ll tell you plainly when a repair choice could affect it. We’re also trained and experienced across nine gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite and Mighty Mule, so we’re fluent in the full range rather than one product. Ghost Controls is one of the systems we know well, not the only one we know.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Fix in Tracy
Ghost Controls failures tend to follow a few patterns. Here’s what we actually see, and why it happens.
- Solar and battery operators that stall mid-cycle. A gate that used to open fully now stops halfway, then won’t budge until the next sunny day. The usual cause is a sealed lead-acid battery that no longer holds voltage under load. In Tracy’s summer heat, that battery ages faster than the manufacturer’s general guidance suggests.
- Control-board and receiver failures. A voltage spike or moisture near an irrigation line can leave the board dead, or the gate stuck moving in one direction only. The board is the brain of the system, and a single bad input can lock it into a fault. We check fault indication before condemning anything.
- Limit-switch and arm-clamp drift. A gate that creeps past its open position, reverses for no reason, or fails to hold fully open usually has drifted limits. Hinge sag and loose clamps throw off the travel settings, so the operator is still doing its job – the gate just moved underneath it.
- Undersized arms on heavier gates. A wood or ornamental gate was fine on install day. Add a few seasons of wind and swelling, and the arm binds and strains. An arm rated for the gate’s real weight, not its catalog weight, is the fix.
- Wiring and accessory faults. Keypads, receivers and remotes that stop responding are often a wiring or voltage problem at the accessory, not a failed accessory. We trace the whole run before recommending a part.
Ghost Controls Parts & Our Repair-vs-Replace Approach
Where Ghost Controls OEM control boards, arms, limit switches and batteries are available, OEM is the safer match. The accessory line is built around the same voltage and plug pattern, so replacing a board with an exact-spec part keeps your keypad, receiver and remotes working the way they were designed to. Quality aftermarket batteries and remotes are reasonable when the specs match exactly – and we verify that they do.
Our repair-vs-replace question is simple: what’s actually failed, and what’s still good? When a board, battery and arm all fail together on an older unit, replacing the operator often costs less than chasing the failures one at a time. We’ll tell you which one makes sense before any work starts, and the price is quoted and agreed in writing first. Call (844) 834-1771 for a free estimate.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We test battery voltage under load, check board fault indication, verify arm and limit settings, and inspect hinge alignment and gate weight. On a Ghost Controls solar system, the battery is the first thing we test, not the last.
- 2
Repair or install. We replace only what tested bad, using parts that fit Ghost Controls equipment. On a new install, we match the operator to the gate’s real weight and travel before mounting anything.
- 3
Test. We re-baseline the travel limits and run the gate through full cycles – open, close, reverse and accessory inputs – until it holds position every time.
- 4
Warranty. We walk you through what’s covered and how to keep your manufacturer’s coverage intact going forward. No surprises at the end of the job.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in Tracy
We service and install the full range of Ghost Controls swing operators and accessories. That includes the TDS series single-swing operator kits and the DTP series dual-swing kits, the Heavy-Duty (HD) series solar swing operators, and the AXS/AXR accessory line – keypads, receivers, remotes and battery backup. Whether you’re repairing an existing Ghost Controls system or installing one from scratch, we’re familiar with the whole setup. Swing gate work is a core part of what we do, along with motor repair and battery backup service. If you’re not sure which operator fits your gate, we’ll measure it and tell you honestly.
We Also Service These Brands
Ghost Controls is one of nine brands we work on. We also service LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking and Elite – from entry-level residential systems to commercial-grade operators. That range means you don’t need a different contractor for each gate on your property, and you get a specialist either way.
FAQs – Ghost Controls Gate Repair Service in Tracy
No. We are an independent service provider, not a Ghost Controls dealer or authorized repair center. We repair, install and service Ghost Controls equipment using quality parts that fit it, and we can work with you on warranty questions, but any manufacturer authorization sits with Ghost Controls, not us.
Yes. Where OEM control boards, arms, limit switches and batteries are available, OEM is the safer match because the accessory line is built around the same voltage and plug pattern. Quality aftermarket batteries and remotes are reasonable when the specs match exactly, and we verify that before installing anything.
Most Ghost Controls repairs are completed in a single visit once we’ve diagnosed the fault. A battery replacement or limit-switch reset is quick; a control-board swap or a full operator replacement takes longer, and we’ll tell you the timeline before work begins. New installations are scheduled after a measure so the right operator is ordered.
We cover the TDS series single-swing kits, DTP series dual-swing kits, Heavy-Duty (HD) series solar swing operators, and the AXS/AXR accessory line including keypads, receivers, remotes and battery backup. If you have a Ghost Controls swing operator, we can service it.
Not if the work is done correctly. We use parts that match the system’s specifications and follow the manufacturer’s guidelines wherever possible, which keeps your coverage intact. If a repair choice could affect your warranty, we’ll tell you before we touch the gate.
There’s no flat number because it depends on what failed – a battery, a board, a limit switch or the whole operator – but every job is quoted in writing and agreed before any work starts. Diagnostics are thorough so the price matches the actual fault, not a guess. Call (844) 834-1771 for an exact quote – estimates are free.
It’s usually the battery. A sealed lead-acid battery that no longer holds voltage under load will open the gate once on a full charge and then trip a low-voltage fault, which shuts the operator down until it recovers. The board is the second suspect, so we test voltage under load and check board fault indication before replacing either. In Tracy’s heat, battery aging is the more common culprit. Call (844) 834-1771 to get it tested – estimates are free.
In most cases it can be repaired. A failed control board is replaceable on its own, separate from the arms and limit switches. We replace only what tested bad and re-baseline the travel limits afterward. When the board, battery and arm all fail together on an older unit, we’ll tell you plainly whether repair still makes sense or a new operator is the better spend. Call (844) 834-1771 to talk it through.
Uneven opening on a dual-swing gate usually comes from one leaf’s arm or limit settings having drifted, or from hinge sag on the heavier side. Each leaf runs on its own settings, so one drifting out of sync shows up as a lag. We check both leaves’ limits, arm clamps and hinge alignment, then reset them to travel together. Call (844) 834-1771 to book a diagnosis.
Usually yes, if the replacement board matches the original’s voltage and plug pattern. The accessory line is built around that consistency, which is why OEM boards are the safer match. We verify compatibility before installing a board so your existing keypad, receiver and remotes keep working. Call (844) 834-1771 with your system details and we’ll confirm.
Yes. A sealed lead-acid battery in a solar operator sits in direct sun and summer heat for years, which speeds up the internal aging that reduces its ability to hold voltage. That’s why a solar gate often fails on the battery first. We test voltage under load rather than replacing on age alone, and we check that the solar panel is charging properly before we call it a battery problem.
Book Your Ghost Controls Service in Tracy, CA
Whether your Ghost Controls gate needs a battery, a board, a limit-switch reset or a full operator replacement, we’ll diagnose it honestly and quote the price in writing before any work starts. Call (844) 834-1771 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Tracy.